Remote Transmitter Battery Replacement

1. While pushing the knob in the direction of the arrow, remove the lower cover.

   Courtesy of MAZDA MOTORS CORP.

2. Push in the tab to unlock the upper cover.

   Courtesy of MAZDA MOTORS CORP.

3. Insert a tape-wrapped flathead screwdriver into the gap, and slide it in the direction of the arrow shown in the figure below.

   Courtesy of MAZDA MOTORS CORP.

4. Turn the flathead screwdriver in the direction of the arrow shown in the figure below and remove the upper cover.

   Courtesy of MAZDA MOTORS CORP.

5. Detach the cap using the tape-wrapped flathead screwdriver.

   Courtesy of MAZDA MOTORS CORP.

6. Remove the battery using the tape-wrapped flathead screwdriver.

   Courtesy of MAZDA MOTORS CORP.

7. Install the battery (CR2032) on the remote transmitter with the positive pole facing up.
8. Install the cap.

   Courtesy of MAZDA MOTORS CORP.

9. Install the upper cover.

   Courtesy of MAZDA MOTORS CORP.

10. Insert the tab of the lower cover into the slot of the remote transmitter and install the lower cover.

Courtesy of MAZDA MOTORS CORP.