Function inspection: Notes
NOTE:
- Perform the procedure with the M-MDS connected to the DLC-2.
- Switch the ignition ON (engine off).
- Display PIDs [BOOST_AIR_TEMP] and [BOOST_AIR_TEMP_VOLT]. (Refer to PID/DATA MONITOR INSPECTION in the appropriate troubleshooting information )
- Compare the voltage and temperature indications for the PIDs [BOOST_AIR_TEMP_VOLT] and [BOOST_AIR_TEMP] with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance Inspection ).