DTC inspection
- Using the M-MDS, perform a DTC inspection and verify if any current sensor-related DTC is detected. (Refer to DTC INSPECTION
in the appropriate troubleshooting information
)
DTC is detected
- Inspect for possible causes of detected DTCs in the order from the top. (Refer to [DTC TABLE [PCM]
] in the appropriate troubleshooting information
)
- If the malfunction is not resolved, replace the current sensor. (See CURRENT SENSOR REMOVAL/INSTALLATION [H3T] ).
No DTC is detected
- Perform a visual inspection. (See VISUAL INSPECTION )
- Inspect for possible causes of detected DTCs in the order from the top. (Refer to [DTC TABLE [PCM]
] in the appropriate troubleshooting information
)