DTC P0107-00: Map Sensor Circuit Low Input

P0107-00: (PCM (SKYACTIV-G)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	MAP sensor circuit low input
Detection condition	The MAP sensor voltage is less than the standard.
Fail-safe	Estimates MAP using MAF sensor and engine speed. Restricts the upper limit of the engine speed. Inhibits the evaporative purge control.
Possible cause	Malfunction in wiring harness (including connector/terminal) between MAP sensor and PCM (See CIRCUIT INSPECTION .) (See CONNECTOR INSPECTION .) MAP sensor malfunction (Refer to MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [SKYACTIV-G 2.0] in service information.) PCM malfunction (Refer to PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0] in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
Courtesy of MAZDA MOTORS CORP.
1	PCM
2	MAP sensor/IAT sensor No. 2 (MAP sensor)