Keyless Receiver Inspection: Notes
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the keyless receiver with the connector still connected. (See KEYLESS RECEIVER REMOVAL/INSTALLATION .)
- Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (see TERMINAL VOLTAGE TABLE (REFERENCE)
).
- If the voltage is not as specified in the terminal voltage table (see TERMINAL VOLTAGE TABLE (REFERENCE)
), inspect the parts under Inspection item(s) and related wiring harnesses.
- If the system does not operate normally even though the parts under Inspection Item(s) and related wiring harnesses do not have any malfunction, replace the keyless receiver.
- If the voltage is not as specified in the terminal voltage table (see TERMINAL VOLTAGE TABLE (REFERENCE)
), inspect the parts under Inspection item(s) and related wiring harnesses.