Assembly Specifications
AXLE ASSEMBLY SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Axle Shaft Flange End Play | .0016-.0024 (.04-.06) | |
| Housing Spread | ||
| Small Center Housing | .004-.006 (.10-.15) | |
| Large Center Housing | .006-.008 (.15-.20) | |
| Pinion Flange Runout | .001 (.03) | |
| Ring Gear Runout | .0008 (.02) Max. | |
| Ring & Pinion Backlash | .0030-.0055 (.08-.14) | |
| Ft. Lbs. (N.m) | ||
| Side Gear Turning Torque | ||
| Standard Differential | 22-66 (30-90) | |
| Limited Slip Differential | 59-103 (80-140) | |
| INCH Lbs. (N.m) | ||
| Pinion Turning Torque | ||
| New Bearings | 10.6-12.4 (1.2-1.4) | |
| Used Bearings | 4.4-8.9 (0.5-1.0) | |