FixVault
Home › Mercedes Benz › 1993 › 400E › Repair and Diagnosis › External Pages › Different car › Section 2 (Wheel Alignment Specifications & Procedures) › Wheel Alignment Specifications

Wheel Alignment Specifications

WARNING: This page is about a different car, the 1993 Mercedes-Benz 300SE, 1993 Mercedes-Benz 300SD, 1993 Mercedes-Benz 300E, and 1993 Mercedes-Benz 300D. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS IN DEGREES (1)

Application Preferred Range
Basic Version
300D & 300E
Camber
Front - 0.42 - 0.75 To - 0.25
Caster
Front 10.42 9.92 To 10.92
Toe-In
Front 0.33 0.16 To 0.50
Rear 0.42 0.34 To 0.59
Toe-Out On Turns
Inner 43 N/A
Outer ***** N/A
300SD & 300SE
Camber
Front - 0.33 - 0.66 To - 0.16
Caster
Front 10.33 9.83 To 10.83
Toe-In
Front 0.58 0.41 To 0.75
Rear 0.58 0.50 To 0.75
Toe-Out On Turns
Inner 43 N/A
Outer ***** N/A
Suspension For Increased Ground Clearance
300D, 300E
Camber
Front - 0.33 0 To - 0.50
Caster
Front 10 9.50 To 10.50
Toe-In
Front 0.33 0.16 To 0.50
Rear 0.42 0.34 To 0.59
Toe-Out On Turns
Inner 43 N/A
Outer ***** N/A
Suspension For Increased Payload
300D, 300E
Camber
Front - 0.08 - 0.41 To 0.09
Caster
Front 10.17 9.67 To 10.67
Toe-In
Front 0.33 0.16 To 0.50
Rear 0.42 0.34 To 0.59
Toe-Out On Turns
Inner 43 N/A
Outer ***** N/A
300D, 300E
Camber
Front - 0.78 - 1.11 To 0.61
Caster
Front 10.67 10.17 To 11.17
Toe-In
Front 0.33 0.16 To 0.50
Rear 0.42 0.34 To 0.59
Toe-Out On Turns
Inner 43 N/A
Outer ***** N/A
(1) Caster specification is measured with wheels turned.
WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred: In. (mm) Range: In. (mm)
300D & 300E
Toe-In
Front 0.17 (4.3) 0.08 To 0.25 (2.0 To 6.3)
Rear 0.21 (5.3) 0.17 To 0.29 (4.3 To 7.3)
300SD & 300SE
Toe-In
Front 0.29 (7.3) 0.20 To 0.37 (5.0 To 9.3)
Rear 0.29 (7.3) 0.25 To 0.37 (6.3 To 9.3)
About FixVault