Test 14: Right Front Window Switch Closing Function Circuit

Using Adapter (202 589 03 63 00), connect Breakout Box (129 589 00 21 00) to convenience control module. See Figure . Turn ignition switch to RUN position. Measure voltage between terminals No. 2 and 4 at breakout box. When right front window switch is in rest position, battery voltage should exist. When right front window switch is in CLOSE position, less than one volt should exist. If voltage is as specified and right front window does not close, check the following and repair as necessary:

• Check wiring. See WIRING DIAGRAMS  .
• Replace convenience control module.

If voltage is not as specified, check wiring. See WIRING DIAGRAMS  . If wiring is okay, replace right front window switch.