FixVault
Home › Mercedes Benz › 1999 › C280 › Repair and Diagnosis › External Pages › Different car › Section 24 (Wheel Alignment Specifications & Procedures) › Wheel Alignment Procedures › Performing Alignment Procedure

Performing Alignment Procedure

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 1998 Mercedes-Benz SLK230, 1998 Mercedes-Benz SL500, 1998 Mercedes-Benz S500, 1998 Mercedes-Benz S420, and 1998 Mercedes-Benz S320. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive vehicle onto electronic alignment system. Unlock rotary and sliding plates. Install brake pedal winch on brake pedal. Attach measuring headed to each wheel. Perform initial measurement. Check vehicle level at front and rear axle and adjust as necessary.
  2. Check ball point position. Check and adjust toe-in at rear axle. Check and adjust caster and camber at front axle. Check and adjust toe-in at front axle. Remove measuring heads and brake pedal winch. Test drive vehicle.
About FixVault