FixVault
Home › Mercedes Benz › 2000 › C43 › Repair and Diagnosis › External Pages › Different car › Section 4 (Engine Controls - Self-Diagnostics With Codes) › Self-Diagnostic System › Retrieving Codes › Using Hand Held Tester (HHT)

Using Hand Held Tester (HHT)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2000 Mercedes-Benz ML320, 2000 Mercedes-Benz E320, 2000 Mercedes-Benz CLK320, 2000 Mercedes-Benz C280, and 1999 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Connect HHT to 38-pin diagnostic connector located in right rear of engine compartment. Turn ignition on. Follow manufacturer's instructions for reading fault codes. If no fault codes are present, but vehicle is experiencing a problem, go to SYMPTOM DIAGNOSTICS .

About FixVault