FixVault
Home › Mercedes Benz › 2000 › CLK430 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 7 (Automatic A/C-Heater Systems) › Removal & Installation › A/C Push Button Control Module › Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2000 Mercedes-Benz C43, 2000 Mercedes-Benz C280, 1999 Mercedes-Benz C43, and 1999 Mercedes-Benz C280. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove radio. Remove 4 screws from radio opening and trim cover. Detach switch block from cover. Remove screws and pull out A/C push button control module (A/C-heater control panel). Disconnect wiring harness from A/C-heater control panel.
  2. To install, reverse removal procedure. Ensure A/C-heater control panel wiring harness is securely attached. Erase fault memory from A/C-heater control panel. Reset version code. See VERSION CODING  under PROGRAMMING.
About FixVault