FixVault
Home › Mercedes Benz › 2000 › ML430 › Repair and Diagnosis › External Pages › Different car › Section 10 (Air Bag Restraint Systems) › Removal & Installation › Control Module › Removal & Installation (E Class)

Removal & Installation (E Class)

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2001 Mercedes-Benz SLK320, 2001 Mercedes-Benz SLK230, 2001 Mercedes-Benz SL600, 2001 Mercedes-Benz SL500, and 2001 Mercedes-Benz S600. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, See AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove ignition key. Remove gear shift cover panel. Remove ashtray and ashtray housing at front of console. Remove radio (if necessary).
  2. Remove center console right side cover screws and right side cover. Disconnect electrical connector for control module. Remove 2 control module mounting screws. Remove control module.
  3. To install, reverse removal procedure. Ensure SRS control module arrow points to front of vehicle. Set parameters and program new SRS control module with Hand-Held Tester (965 589 00 01 00). Activate air bag system. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK .
About FixVault