FixVault
Home › Mercedes Benz › 2000 › ML430 › Repair and Diagnosis › Maintenance › Maintenance Reminder Light (Reset Procedures) › Tire Pressure Monitor System Reminder › TPMS Reminder Reset - Procedure 03

TPMS Reminder Reset - Procedure 03

NOTE: Whenever tire pressure has been adjusted, or when wheels or tires have been replaced, the TPM system must be reactivated before it can work.
  1. Ensure inflation pressure of all 4 tires is set to specification.
  2. Switch ignition on. Press the left or right arrow button on the multifunction steering wheel to select menu.
  3. Press the up or down arrow button to select "RUN FLAT INDICATOR ".
  4. Press the button "OK" to confirm. The following message appears in the multifunction display: "RUN FLAT INDICATOR ACTIVE MENU: OK-BUTTON".
  5. Press button "OK". The following message will appear in the multifunction display: "RESTART RUN FLAT INDICATOR? YES or NO".
  6. Press the up or down arrow button to select YES.
  7. Press the OK button to confirm. The following message will appear in the multifunction display: "RUN FLAT INDICATOR RESTARTED".
  8. After a certain "learning phase", the Run Flat Indicator checks the set pressure values for all 4 tires.
About FixVault