FixVault
Home › Mercedes Benz › 2000 › ML430 › Repair and Diagnosis › Maintenance › Maintenance Reminder Light (Reset Procedures) › Tire Pressure Monitor System Reminder › TPMS Reminder Reset - Procedure 16

TPMS Reminder Reset - Procedure 16

NOTE: The manfacturer's description for this procedure is restarting the the tire pressure monitor.
NOTE: The tire pressure monitor must be restarted when tire pressures are set to a new value (as a result of changed drive or load characteristics, for example). The tire pressure monitor then monitors the new tire pressure values. Re-inflating tires to the currently established specification does not require a restart.
NOTE: TPMS restart is accomplished by using the multifunction display control buttons on left side of steering wheel.
  1. Turn ignition switch to OFF position.
  2. Ensure inflation pressure of all 4 tires is set to specification.
  3. Make sure that the SmartKey is in position 2 in the ignition lock.
  4. Press the LEFT or RIGHT ARROW button to select the SERV. menu.
  5. Press the UP or DOWN ARROW button to select TIRE PRESSURE.
  6. Press the OK button. The multifunction display shows the current tire pressure of the individual tires, or the message "Tire pressure will be displayed after driving a few minutes".
  7. Press the down arrow button. The message "Use Current Pressures as New Reference Values" will appear.
  8. Press the OK button. The message "Tire Press. Monitor Restarted" will appear.
  9. After about 10 minutes driving time the current tire pressures are displayed. The activation process is complete.
About FixVault