TPMS Reminder Reset - Procedure 17
NOTE:
The manfacturer's description for this procedure is restarting the the tire pressure monitor.
NOTE:
The tire pressure monitor must be restarted when tire pressures are set to a new value (as a result of changed drive or load characteristics, for example). The tire pressure monitor then monitors the new tire pressure values. Re-inflating tires to the currently established specification does not require a restart.
NOTE:
TPMS restart is accomplished by using the multifunction display control buttons on left side of steering wheel.
- Turn ignition switch to OFF position.
- Ensure inflation pressure of all 4 tires is set to specification.
- Make sure that the SmartKey is in position 2 in the ignition lock.
- Press and hold the lower left button (Menu Scroll) on the multifunction steering wheel until the standard display (Odometer/Trip Odometer) appears in the multifunction display.
- Press the UP or DOWN arrow button until the tire pressure of each wheel appears or the "Tire Pressure Displayed Only After Driving For A Few Minutes" message is shown.
- Press the reset button on the instrument cluster. See Fig 1. The "Restart Tire Pres. Monitor?" message appears in the multifunction display.
- To confirm the restart, press the + button. The "Tire Pres. Monitor Restarted" message appears in the multifunction display.
- After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.