Rear Axle
- On vehicles with rear level control, DO NOT correct vehicle level at rear axle which is too low by changing connecting rod of level controller. Check level control for system operation. Level control is operating if vehicle rear ride height raises and lowers when additional weight is added or removed from vehicle.
- If level control is operating, adjust vehicle level by changing rear springs and/or rear spring rubber mounts. Rear spring rubber mounts are available in 4 different sizes to correct vehicle riding height. Rear spring rubber mounts are identified by the number of nubs on rubber mount. See SPRING RUBBER MOUNT SPECIFICATIONS
table. If vehicle is not level after replacing rubber spring mounts, it may be necessary to replace springs. Always replace springs in pairs. Maximum difference between left and right side of vehicle is 9 mm.
SPRING RUBBER MOUNT SPECIFICATIONS
| Millimeter Height |
Number Of Nubs |
| 5 |
1 |
| 9 |
2 |
| 13 |
3 |
| 17 |
4 |
| 21 |
5 |