Parking Lock Interlock Cable With Adjuster At Brake Pedal

Shift selector lever must be in "P" position for removal and installation procedure. Remove cover below left side of instrument panel. Pull off entrance strip and remove "A" pillar footwell cover. Remove accelerator pedal from floor panel and remove driver side flooring. Remove air duct for rear compartment heating.
Unhook cable from release lever. Compress locking device and push cable upwards and out of mount on pedal bearing bracket. See Fig 1 . Using screwdriver, pry locking device outward on cable housing at rear of transmission. Pull cable from transmission. See Fig 2 . To install, reverse removal procedure.

Fig 1: Removal Of Steering Lock Cable

Courtesy of MERCEDES OF NORTH AMERICA

Fig 2: Removal Of Parking Lock Interlock Cables

Courtesy of MERCEDES OF NORTH AMERICA