FixVault
Home › Mercedes Benz › 2000 › SL500 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft Systems › System Tests › Test 1: Anti-Theft Control Module

Test 1: Anti-Theft Control Module

  1. Connect harness adapter and breakout box to anti-theft control module. Measure voltage between terminal No. 4 at breakout box and battery positive voltage. Battery voltage should exist. If voltage is as specified, go to next step. If voltage is not as specified, check wiring. See WIRING DIAGRAMS  .
  2. Measure voltage between terminals No. 1 and 4 at breakout box. Battery voltage should exist. If voltage is not as specified, check wiring. See WIRING DIAGRAMS  .
About FixVault