FixVault
Home › Mercedes Benz › 2001 › ML430 › Repair and Diagnosis › Electrical › Charging Systems › Generators & Regulators - 163 Chassis › Service Precautions › Battery Disconnect/Connect › Connect Procedures

Connect Procedures

  1. To install, reverse removal procedure. Install new back up battery for TELE AID. Switch OFF service mode in emergency call system by turning ignition on. Confirm "Leave Service Mode" with okay on handset and then confirm "No Telematic Service" with okay. If removed, tighten luggage compartment cargo anchoring lugs to 15 ft. lbs. (20 N.m).
  2. If a quiescent current retention unit was not used, perform basic programming. See BASIC PROGRAMMING  . After repairs using appropriate scan tool retrieve and erase any DTCs from memory. See RETRIEVING & ERASING DIAGNOSTIC TROUBLE CODES  .
About FixVault