Steering -- 163 Chassis

• Diagnostic Trouble Code List
• General Information
  • General notes: Passenger cars: Steering - AH46.00-Z-9999AZ
  • Evaluating steering rack when repairing accident vehicles - AH46.20-P-9409-01A
• Safety Precautions
  • Danger of injury Danger of poisoning - AS46.00-Z-0001-01A
  • Safety information: Steering - AS46.00-Z-9999ZZ
• Trouble Diagnosis
  • Noticeable play in steering column, ESP warning lamp illuminates (C1140, C1143, C1170, C1172, C1173) - AF46.10-P-3200A
  • Insufficient power assistance and stored diagnostic trouble code C1320 - AF46.50-P-3100A
• Testing & Repair
  • Testing and repair work: Passenger cars: Steering - AR46.00-Z-9163AA
  • Removing and installing steering wheel - AR46.10-P-0100GH
  • Set the clock spring contact to center position - AR46.10-P-0200-01GH
  • Removing, installing contact spiral - AR46.10-P-0200GH
  • Activating steering angle sensor - AR46.10-P-0300-01A
  • Remove/install steering angle sensor rotor - AR46.10-P-0350GH
  • Adjust installed position of lower steering shaft relative to jacket tube - AR46.10-P-0400-02GH
  • Remove/install jacket tube - AR46.10-P-0400GH
  • Remove/install lock cylinder - AR46.10-P-0800GH
  • Remove/install steering wheel lock - AR46.10-P-0900GH
  • Remove/install steering coupling - AR46.10-P-8000GH
  • Disassemble/assemble mechanically adjustable casing tube - AR46.15-P-0550GH
  • Turning rack-and-pinion steering to center position and fitting steering coupling - AR46.20-P-0600-01GH
  • Remove/install rubber mount of rack-and-pinion fixing - AR46.20-P-0600-02GH
  • Install rack-and-pinion steering to front axle carrier - AR46.20-P-0600-03GH
  • Remove/install rack-and-pinion steering - AR46.20-P-0600GH
  • Fill power steering pump and bleed - AR46.30-P-0010B
  • Checking oil pressure of power steering pump - AR46.30-P-0100GH
  • Removing and installing power steering pump - AR46.30-P-0500B
  • Mount bracket for power steering pump oil cooler line - AR46.30-P-0510GH
  • Pressing out and attaching track rod joint at steering knuckle - AR46.40-P-0200-02C
  • Removing and installing tie rod - AR46.40-P-0200GH
  • Remove/install inner tie rod with axial joint - AR46.40-P-0201GH
  • Detaching and attaching inner clamp - AR46.40-P-0400-01GH
  • Check and replace rubber boot - AR46.40-P-0400GH
• Maintenance
  • Check and correct power steering fluid level - AP46.00-P-4611BB
  • Checking tie rod and drag link joints for play and checking rubber boots - AP46.00-P-4653GH
• Removal & Installation
  • Retrofitting bracket for power steering oil cooler line - SM46.30-P-0002A