FixVault
Home › Mercedes Benz › 2001 › S430 › Repair and Diagnosis › Quick Lookups › Technical Bulletins › Technical Service Bulletins › Accessories Control Systems › Instrument Cluster Odometer Version Coding (54.30/92E)

Instrument Cluster Odometer Version Coding (54.30/92E)

Publication date: 2005-12-02
Reference number: 54.30/92E
Supersedes refnos: 54.30/92, 54.30/92A

INSTRUMENT CLUSTER ODOMETER VERSION CODING

INSTRUMENT CLUSTER ODOMETER VERSION CODING

TECHNICAL SERVICE BULLETIN

Reference Number(s): P-B-54.30/92E, Date of Issue:  December 2, 2005
MERCEDES-BENZ: Model 215.373/374/375/376/378/379; Model 220.067/170/173/174/175/176/178/179/183/184
GROUP: 54 - Electrical System, Equipment and Instruments
Superceded Bulletin(s): P-B-54.30/92D, Date of Issue:  November 21, 2005

SUBJECT

Model 215.373/374/375/376/378/379 

Model 220.067/170/173/174/175/176/178/179/183/184 

Instrument Cluster Odometer Version Coding 

If you are replacing the instrument cluster on the above model vehicles please follow one of the following procedures when installing the instrument cluster.

PROCEDURE 1 - INSTALLATION OF BOTH AN INSTRUMENT CLUSTER AND AN EIS WHILE USING STAR DIAGNOSIS VERSION 09/05 OR EARLIER

  1. Ensure that the latest software update is installed into STAR Diagnosis
  2. Contact the TAC and obtain password to access total distance storage coding.
  3. Enter password by entering into the following STAR Diagnosis menus:
    • At the "Category Selection" menu press F6 -> Select Modifications and New Features -> Press F6 -> Enter password in white box -> Press F2
  4. Install Instrument Cluster as per WIS documentation (AR54.30-P-6015I). Do not perform any version coding. 
  5. Install EIS as per WIS documentation (AR80.57-P-1000M)
  6. Version code EIS, by entering into the following STAR Diagnosis menus:
    • Control Units -> Body -> EIS Electronic Ignition Switch -> Initial Startup
  7. Ensure that "Redundant Distance Storage" is set to Active, by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Control Unit Adaptations -> Version Coding -> Coding Specific for Instrument Cluster.
  8. Synchronize instrument cluster to Drive Authorization system by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Diagnosis to Plant Specifications -> Development Data -> Actuations -> EZS-Schluessel ID in EEPROM schreiben (FN_EZS_ID_schreiben) -> Press F3 to actuate
  9. Enter total distance of vehicle, by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Diagnosis to Plant Specifications -> Development Data -> Control Unit Adaptations -> Control Unit Adaptations (Download) -> Kilometerstand setzen (DL_Kilometer) -> In white space, enter total distance in kilometers -> Press F3 (Result: 1 will appear)
    WARNING: Total distance must be entered in kilometers.
  10. Version code instrument cluster by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Initial Start-Up.

PROCEDURE 2 - INSTALLATION OF INSTRUMENT CLUSTER (VEHICLE ALREADY EQUIPPED WITH AN EIS PART NUMBER PRECEDING A215 545 02 08) WHILE USING STAR DIAGNOSIS VERSION 09/05 OR EARLIER

Perform Procedure 1 except skip Steps 5 and 6.

PROCEDURE 3 - INSTALLATION OF INSTRUMENT CLUSTER (VEHICLE ALREADY EQUIPPED WITH AN EIS PART NUMBER OF A215 545 02 08 OR LATER) WHILE USING STAR DIAGNOSIS VERSION 09/05 OR EARLIER

  1. Ensure that the latest software update is installed into STAR Diagnosis
  2. Ensure that "Redundant Distance Storage" is set to Active, by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Control Unit Adaptations -> Version Coding -> Coding Specific for Instrument Cluster.
  3. Version code instrument cluster by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Initial Start-Up
  4. When prompted by SDS, install instrument cluster as per WIS documentation (AR54.30-P-6015I)

PROCEDURE 4- INSTALLATION OF INSTRUMENT CLUSTER WHILE USING STAR DIAGNOSIS VERSION 10/05 OR LATER

  1. Ensure that the latest software update is installed into STAR Diagnosis
  2. Ensure that "Redundant Distance Storage" is set correctly (Set to Active is EIS equal or greater than A215 545 02 08), by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Control Unit Adaptations -> Version Coding -> Coding Specific for Instrument Cluster.
  3. Version code instrument cluster by entering into the following STAR Diagnosis menus:
    • Control Units -> Information & Communication -> ICM Instrument Cluster with Maintenance Interval Display -> Initial Start-Up
  4. When prompted by SDS, install instrument cluster as per WIS documentation (AR54.30-P-6015I)
    WARNING: The "reading of main odometer" in SDS version 10/05 must be entered in kilometers.
    NOTE: Instrument clusters can no longer be ordered with mileage. Please consult DTB P-B-54.30/150, dated November 21, 2005, for information regarding odometer mileage setting policy and procedure.
About FixVault