DTC P2000: Stored In Electronic Selector Lever Module

Cause

Braking torque transmitted by ESP control Module occasionally not logical. The selector lever module is not the cause for this DTC.

NOTE: DTC P2000 (breaking torque (CAN) transmitted by ESP control module not logical) is stored in EWM, function not negatively influenced.

Remedy

NOTE: This is not an EWM control module malfunction and replacement is not necessary. This means that the signal transmitted by the ESP control module was not logical.

If no complaint was present:

1 - Connect STAR DIAGNOSIS, read out and erase fault memory. See CONNECT STAR DIAGNOSIS AND READ OUT FAULT MEMORY in GENERAL INFORMATION article.
NOTE: The DTC cannot be erased on vehicles with ESP control units 209 545 02 32 or 209 545 03 32 and simultaneously installed selector lever module with software status up to 8/01.

If complaint is present:

2 - Process DTC in ESP.

DTC INDEX

DTC	Description
DTC P2000	STORED IN ELECTRONIC SELECTOR LEVER MODULE