Complete Engine -- 208 Chassis

• General Information
  • General information on inspecting cylinder walls - AH01.00-P-0300-01A
  • Use of engine no. when installing reconditioned engines and factory-new replacement engines or crankcases - AH01.10-P-0001-01A
  • Notes on cylinder head gasket - AH01.30-P-1000
    • Notes on application of sealant to cylinder head gasket - AH01.30-P-1000-04V
    • Information on applying sealant to a cylinder head gasket - AH01.30-P-1000-04VA
    • Information on cylinder head contact surface - AH01.30-P-1000-05A
    • Information for assigning the cylinder head gaskets - AH01.30-P-1000-06V
  • Notes on application of sealant timing case cover - AH01.40-P-1000
    • Notes on application of sealant timing case cover - AH01.40-P-1000-01B
    • Notes application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06A
  • Notes on application of sealant oil pan - AH01.45-P-0001
    • Notes on application of sealant oil pan - AH01.45-P-0001-01C
    • Notes on application of sealant oil pan - AH01.45-P-0001-01D
• Testing & Repair
  • Inspecting cylinders with light probe - AR01.00-P-0200AU
  • Testing compression pressure - AR01.00-P-1200
    • Testing compression pressure - AR01.00-P-1200B
    • Testing compression pressure - AR01.00-P-1200V
  • Inspect cylinders for leaks - AR01.00-P-1300HV
    • Notes
    • Firing order - AR01.00-P-1300-03HA
  • Disconnecting, connecting engine wiring harness - AR01.00-P-2410K
  • Testing and repair work: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AR01.00-Z-9112AB
  • Testing and repair work: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AR01.00-Z-9113AB
  • Connect compression tester - AR01.10-P-0010-01E
  • Cranking engine with starter. - AR01.10-P-0110V
  • Removing and installing engine - AR01.10-P-2400CB
  • Remove/install cylinder head cover - AR01.20-P-5014
    • Remove/install cylinder head cover - AR01.20-P-5014B
      • Notes
      • Ensure gasket of cylinder head cover is correctly installed - AR01.20-P-5014-01B
    • Remove/install cylinder head cover - AR01.20-P-5014BV
  • Repairing spark plug thread - AR01.30-P-5440BV
    • Notes
    • Tap thread in spark plug hole and screw in threaded insert - AR01.30-P-5440-01B
    • Caulk threaded insert - AR01.30-P-5440-02B
  • Remove/install cylinder head - AR01.30-P-5800
    • Remove/install cylinder head - AR01.30-P-5800B
    • Remove/install cylinder head - AR01.30-P-5800BA
    • Checking cylinder head bolts - AR01.30-P-5800-03B
    • Tightening instructions for cylinder head bolts - AR01.30-P-5800-07B
    • Slackening diagram for cylinder head bolts - AR01.30-P-5800-09B
  • Remove/install timing case cover - AR01.40-P-8000B
    • Notes
    • Screw diagram for timing case cover - AR01.40-P-8000-01B
    • Bolt diagram for timing case cover - AR01.40-P-8000-01RVK
  • Remove/install the end cover - AR01.40-P-8913B
  • Measuring, boring and honing cylinder bores - AR01.40-P-9201AA
    • Notes
    • Chamfer cylinder bores - AR01.40-P-9201-01A
  • Measure cylinder bores - AR01.40-P-9202AV
  • Remove/install oil pan - AR01.45-P-7500FC
    • Notes
    • Oil pan bolt diagram - AR01.45-P-7500-06F
  • Remove/install bottom part of oil pan - AR01.45-P-7555VA
• Test & Adjustment Values
  • Test and adjustment values: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - BE01.00-Z-9999AZ
    • Notes
    • Compression pressure - BE01.00-P-1000-01D
    • Cylinder leaktightness - BE01.00-P-1000-02Z
  • Cylinder head values- BE01.30-P-1000
    • Check values of cylinder head - BE01.30-P-1000-02D
    • Cylinder head/cylinder head bolts - BE01.30-P-1000-04B
  • Check values for cylinder bore and crankcase - BE01.40-P-1000
    • Check values for cylinder bore - BE01.40-P-1000-01F
    • Check values of crankcase - BE01.40-P-1000-02E
• Maintenance
  • Cleaning and preserving engine and engine compartment - AP01.00-P-1000ZZ
• Component Modifications
  • Rear suspension eyes of engine strengthened - BT01.00-P-0001-01A