CDI control unit - function - GF07.16-P-3102-03IA

CDI control unit - versions 

• EU 3
• EU 3 up (Update)
• EU 4
• EU 4 red (derated)
• 

The following functions are covered by the CDI control unit:

Electronic drive control 

• New Automatic Transmission / automated manual transmission support
• ASR/ESP support
• Drive off torque limitation

General base functions 

• Synchronization
• Load detection
• Starter control
• Interface communication
• Variant coding

Air control function 

• Exhaust gas recirculation control
• Boost pressure control

Injection functions 

• Pre-injection, main injection and after injection
• Rpm limitation
• Fuel pump control
• High pressure pump control
• Rail pressure control
• Inertia fuel shutoff
• Idling speed control [ISC]
• Individual cylinder torque control

Special functions 

• Altitude adaptation
• Torque interface
• Monitoring concept
• Vehicle immobilizer function (Drive Authorization System 3)
• Diesel particle filter regulation (EU 4 with DPF)
• Calculation and expenditure for fuel consumption
• Intake manifold pressure probe
• Suction fan control
• Anti-jerk control
• Cruise control (with speed limiter, except )
• Glow time control
• Adaptation based on the average value of the amount (EU 4 and )
• Derating (EU 4 red)

Diagnostic functions 

• Fault memory handling
• Diagnosis of engine management system
• EOBD: model 203 as of 01.06.2003

  model 211 as of 01.03.2003

  model 220 as of 01.09.2003

• Diagnosis over a CAN
• Diagnosis via K-line