Automatic Transmission -- Testing & Repair -- 230 Chassis

• General Information
  • Notes on automatic transmission - AH27.19-P-0001-01NKB
• Testing & Repair
  • Automatic Transmission Oil Level Inspection (Correct If Necessary) - AR27.00-P-0100AC (SL500 2003, SL55 AMG, SL600)
    • Notes
    • Automatic transmission filling capacity
  • Automatic Transmission Oil Level Inspection (Add ATF If Necessary) - AR27.00-P-0101A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Filling automatic transmission with fluid - AR27.00-P-0270W (SL500 2004-2006, SL550, SL63 AMG)
  • Remove/install oil pump - AR27.10-P-0400A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install transmission with torque converter - AR27.10-P-0500
    • Remove/install transmission with torque converter - AR27.10-P-0500R (SL500 2003, SL55 AMG)
      • Notes
      • Disconnecting and connecting plug connector - AR27.10-P-0500-01A
      • Automatic transmission filling capacity
    • Remove/install transmission with torque converter - AR27.10-P-0500RA (SL500 2004-2006)
      • Notes
      • Check oil level in automatic transmission and correct if necessary - AR27.00-P-0100W (SL500 2004-2006)
    • Remove/install transmission with torque converter - AR27.10-P-0500RX (SL550)
      • Notes
      • Detach/attach torque converter on driver - AR27.20-P-0100-01A
    • Remove/install transmission with torque converter - AR27.10-P-0500RC (SL600, SL65 AMG)
      • Notes
      • Separate/assemble plug - AR27.10-P-0500-01H
  • Remove/install automatic transmission - AR27.10-P-0502RMG (SL63 AMG)
    • Notes
    • Detach/mount start-up clutch on driven plate - AR27.51-P-0400-01W
  • Fasten transmission to assembly stand - AR27.10-P-0600
    • Fasten transmission on assembly stand - AR27.10-P-0600-01W (SL500 2004-2006, SL550, SL63 AMG)
    • Fasten transmission to assembly stand - AR27.10-P-0600-01B (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install oil filler pipe for automatic transmission - AR27.10-P-7010H (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install automatic transmission oil pan - AR27.10-P-7030W (SL500 2004-2006, SL550, SL63 AMG)
  • Remove/install drive unit control unit - AR27.19-P-0050AMG (SL63 AMG)
  • Remove/install buttons and rotary switch of Drive Unit - AR27.19-P-0055AMG (SL63 AMG)
  • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200
    • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200W (SL500 2004-2006, SL550, SL63 AMG)
    • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Insert selector valve into driver of detent plate - AR27.19-P-0200-01A
  • Remove/install control solenoid valves of electric controller unit - AR27.19-P-0212A (SL500 2004-2006, SL550, SL63 AMG)
  • Disassemble and assemble electrohydraulic control unit - AR27.19-P-0220A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Disassemble and assemble electrohydraulic controller unit - AR27.19-P-0220B (SL500 2004-2006, SL550, SL63 AMG)
  • Replace pilot bushing in the electrohydraulic control unit - AR27.19-P-0230A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install electronic transmission control unit (EGS) - AR27.19-P-1719R (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install torque converter - AR27.20-P-0500
    • Remove/install torque converter - AR27.20-P-0500-01W (SL500 2004-2006, SL550)
    • Remove/install torque converter - AR27.20-P-0500-01B (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Dismantle and assemble shift plate - AR27.35-P-0350A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205
    • Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205RA (SL500 2004-2006, SL550, SL63 AMG)
    • Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205R (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220
    • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220B (SL500 2004-2006, SL550, SL63 AMG) (with range selector lever)
    • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220A (SL550, SL63 AMG) (with Intelligent Servo Module - ISM)
  • Remove/install oil pump radial shaft sealing ring - AR27.40-P-0300A
  • Remove/install shield at transmission - AR27.40-P-0700-01RX (SL500 2004-2006, SL550, SL63 AMG)
  • Ball bearing/twelve-point collared nut for transmission housing - AR27.50-P-0600
    • Screw on and secure twelve-point collared nut and secure - AR27.50-P-0600-04B
    • Install grooved ball bearing in rear transmission housing - AR27.50-P-0600-05A
    • Measure end play between park pawl gear and grooved ball bearing - AR27.50-P-0600-06A
  • Detach/attach transmission housing on torque converter housing - AR27.50-P-0601
    • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601W (SL500 2004-2006, SL550)
    • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Remove grooved ball bearing in rear of transmission housing - AR27.50-P-0601-01A
  • Remove/install main components of the transmission - AR27.50-P-0610W (SL500 2004-2006, SL550, SL63 AMG)
  • Remove/install K3, rear hollow shaft, rear planet carrier and output shaft - AR27.50-P-0611W (SL500 2004-2006, SL550, SL63 AMG)
  • Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3 - AR27.50-P-0612W (SL500 2004-2006, SL550, SL63 AMG)
  • Remove/install output flange - AR27.50-P-0620
    • Remove/install output flange - AR27.50-P-0620-02R
    • Output flange removal and installation - AR27.50-P-0620-02W
  • Removing and installing multiple-disc clutches K1, K2 and K3 - AR27.50-P-0621A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Dismantling and assembling oil pump - AR27.50-P-0720-01A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721
    • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721W (SL500 2004-2006, SL550)
    • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721WMG (SL63 AMG)
    • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Inserting and measuring multiple-disc pack B3 - AR27.50-P-0780-11A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Removing and installing multi-disk brake B2, disk pack B3 and park pawl gear - AR27.50-P-0781A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install BPC clutch pack, multi-disk brake B2 and park pawl gear - AR27.50-P-0782W (SL500 2004-2006, SL550, SL63 AMG)
  • Dismantling and assembling output shaft with center and rear gear set - AR27.50-P-0810A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
    • Notes
    • Checking and adjusting end play between shim and retaining ring - AR27.50-P-0810-01A
  • Disassembling and assembling rear hollow shaft with rear freewheel - AR27.50-P-0850A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Dismantle and assemble rear tubular shaft - AR27.50-P-0851W (SL500 2004-2006, SL550, SL63 AMG)
  • Disassemble/assemble multi-disk brake B1 - AR27.50-P-0870
    • Disassemble/assemble multi-disk brake B1 - AR27.50-P-0870W (SL500 2004-2006, SL550, SL63 AMG)
    • Dismantling and assembling multi-disk brake B1 - AR27.50-P-0870A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Inserting and measuring multiple-disc pack B1 - AR27.50-P-0870-01AA
  • Disassemble/assemble multi-disk brake B2 - AR27.50-P-0880
    • Disassemble/assemble multi-disk brake B2 - AR27.50-P-0880W (SL500 2004-2006, SL550, SL63 AMG)
      • Notes
      • Assembling piston guide and external plate carrier of multi-disk brake B2 - AR27.50-P-0880-01W
    • Dismantling and assembling multiple-disc brake B2 - AR27.50-P-0880A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Assembling piston guide and outer multiple-disc carrier of multiple-disc brake - AR27.50-P-0880-01A
      • Inserting and measuring multiple-disc pack B2 - AR27.50-P-0880-02A
  • Disassemble/assemble multi-disk brake B3 - AR27.50-P-0890W (SL500 2004-2006, SL550, SL63 AMG)
  • Disassemble/assemble clutch K1 - AR27.51-P-0800
    • Dismantling and assembling clutch K1 - AR27.51-P-0800W (SL500 2004-2006, SL550, SL63 AMG)
    • Disassemble/assemble clutch K1 - AR27.51-P-0800B (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Insert and measure multi-disk pack K1 - AR27.51-P-0800-02AA
  • Disassemble/assemble K2 clutch - AR27.51-P-0820W (SL500 2004-2006, SL550, SL63 AMG)
    • Notes
    • Inserting and measuring multiple-disc pack K2 - AR27.51-P-0820-02A
  • Dismantling and assembling drive shaft with clutch K2 and front gear set - AR27.51-P-0825A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Disassemble/assemble clutch K3 - AR27.51-P-0830
    • Disassemble/assemble clutch K3 - AR27.51-P-0830W (SL500 2004-2006, SL550, SL63 AMG)
    • Disassemble and assemble clutch K3 - AR27.51-P-0830A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
      • Notes
      • Inserting and measuring multiple-disc pack K3 - AR27.51-P-0830-01AA
  • Measure and adjust clearance - AR27.51-P-7229W (SL500 2004-2006, SL550, SL63 AMG)
    • Notes
    • Measure and adjust clearance of BR multi-disk brake - AR27.51-P-7229-01W
    • Adjustment values of multi-disk brake B1
    • Adjustment values of multi-disk brake B2
    • Adjustment values of multi-disk brake B3
    • Adjustment values of multi-disk clutch K1
    • Adjustment values of multi-disk clutch K2
    • Adjustment values of multi-disk clutch K3
  • Flush out oil cooler lines and oil cooler - AR27.55-P-0001
    • Flushing out oil cooler lines and oil cooler - AR27.55-P-0001R (SL500, SL63 AMG)
    • Flush out oil cooler lines and oil cooler - AR27.55-P-0001A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Flush out automatic transmission and torque converter - AR27.55-P-0100
    • Flush out automatic transmission and torque converter - AR27.55-P-0100B (With transmission rinsing device)
    • Flush out automatic transmission and torque converter - AR27.55-P-0100A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600
    • Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600RX (SL550)
      • Notes
      • Remove/install lines at automatic transmission - AR27.10-P-0502-01RX (SL550)
    • Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600RMG (SL63 AMG)
      • Notes
      • Disconnect/connect transmission oil line - AR27.10-P-0501-03SX
  • Remove/install automatic transmission fluid cooler - AR27.55-P-1000RMG (SL63 AMG)
  • Remove/install ignition lock control cable - AR27.60-P-0122R
  • Remove/install electronic selector lever module (ESM) - AR27.60-P-0901
    • Remove/install electronic selector lever module (ESM) - AR27.60-P-0901RA (SL500 2004-2006, SL550, SL63 AMG)
    • Remove/install electronic selector lever module (ESM) - AR27.60-P-0901R (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install selector lever handle with covering - AR27.60-P-0905
    • Remove/install selector lever handle with covering - AR27.60-P-0905R (SL500, SL550, SL55 AMG, SL600, SL65 AMG)
    • Remove/install selector lever handle with covering - AR27.60-P-0905AMG (SL63 AMG)
  • Remove/install park pawl mechanism - AR27.60-P-0950
    • Remove, install park pawl mechanism - AR27.60-P-0950W (SL500 2004-2006, SL550, SL63 AMG)
    • Remove/install park pawl mechanism - AR27.60-P-0950A (SL500 2003, SL55 AMG, SL600, SL65 AMG)
  • Remove/install and set shift rod - AR27.60-P-0990R