ME-SFI driving mode function - GF07.61-P-2005F

ENGINE 104.941 /943 /944 /991 /994as of 1.8.96

ENGINE 104.995 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998 with CODE (498) as of Model year 97 Japanese version

ENGINE 111.921 /942 as of 1.9.98, 111.943, 111.944 as of 1.8.96, 111.946 as of 1.6.98, 111.947 /973, 111.975 as of 1.8.96

ENGINE 111.945 in MODEL 208.335/435 as of 1.6.98, 202.020 /080 as of 1.9.98

ENGINE 111.974 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998

ENGINE 112.910 /911 /912 /913 /914 /916 /917 /920 /921 /922 /923 /940 /941 /942 /943 /944 /946 /947 /949 /953 /954 /955 /970 /972 /973 /975

ENGINE 113.940 /941 /942 /943 /948 /960 /961 /963 /965 /966 /967 /968 /969

ENGINE 119.980 /981 /982 /985

ENGINE 120.982/ 983

ENGINE 137.970

ME fuel supply function	Engine 104, 111, 119, 120 in Model 129, 140, 170, 202, 208, 210	GF07.61-P-3004F
	Engine 112, 113, 137 (except in Model 203, 209, 211)	GF07.61-P-3004A
	Engine 112.91/94/95 203	GF07.61-P-3004P
	Engine 112.91/94/95, 113.96 in Model 211
	Engine 112.912/955, 113.968 in Model 209
ME-SFI ignition system function		GF15.12-P-0001F
ECI ignition system function	Engine 137	GF15.15-P-3000L
ME-SFI warming-up control function		GF07.61-P-3022F
ME-SFI acceleration enrichment function		GF07.61-P-3015F
ME-SFI part load/full load operation function		GF07.61-P-3016F
ME-SFI deceleration fuel shutoff function		GF07.61-P-4019F
ME-SFI safety fuel shutoff function		GF07.61-P-3018F
ME-SFI limiting maximum vehicle speed function		GF07.61-P-3019F
ME-SFI limiting maximum engine speed function		GF07.61-P-3007F
Camshaft adjustment, function	Engine 104 (except HFM sequential multiport fuel injection/ignition system), 111, 119, 120 Engine 137.970	GF07.61-P-4021F
	Engine 137.970	GF07.61-P-4021L
Electronic accelerator, location/design/ function	Engine 104, 111, 112, 113, 119, 137	GF30.20-P-3010E
	Engine 120	GF30.20-P-3010F
Cylinder shutoff function	Engine 113.960 with cylinder shutoff (code 479)	GF07.61-P-3033B
	Engine 137.970	GF07.61-P-3033L
ME Flexible Fuel Vehicle (FFV) function	code 929 Flexible Fuel Vehicle (FFV), engine 112.946	GF07.61-P-3021P
Cruise control (CC) function	With cruise control Engine 104 (except HFM sequential multiport fuel injection/ignition system), 119, 120	GF30.30-P-0001F
	With cruise control Engine 111, 112, 113, 137	GF30.30-P-0001FA
Distronic (DTR), function	Model 215, 220 up to 30.06.00	GF30.30-P-0002K
	Model 203, 209, 211, 215, 220, 230 off 01.07.00	GF30.30-P-0002KA
Variable speed limiter, function	Additional cruise control function except	GF30.30-P-3001A
Smooth engine running analysis function	Engine 137: Identification of combustion misfiring by means of ionic current signal, see ECI ignition system function.	GF07.61-P-3034F
ME-SFI lambda control function		GF07.61-P-4022F
Fan control function	Engine 111 with fan control Engine 112, 113, 137	Engine 112, 113, 137
ME-SFI transmission shift delay, function	with automatic transmission	GF07.61-P-4023F
Fuel consumption signal function	Engine 104, 111, 112, 113, 119.98, 120.98, 137 with CODE (245) trip computer	GF07.61-P-3029F
Exhaust gas recirculation, function	Engine 111.974	GF14.20-P-3000G
	Engine 112, 113	GF14.20-P-3000A
ME-SFI diagnosis fault memory function		GF07.61-P-2004F
Turbocharging, function	Engine 111.943 /944 /973 /975	GF09.00-P-2000G
Air intake, function	Engine 112	GF09.00-P-3000A
Intake manifold switchover, function	Engine 104.941/942/ 943/ 944/ 945/ 991/ 992/ 994/ 995	GF07.61-P-3028D
	Engine 112, 113	GF07.61-P-3028A
Exhaust system, location/task/design/function		GF49.00-P-2000F
Three-way catalytic converter location/task/design/function		GF49.10-P-3002F
Evaporative emission control system function		GF47.30-P-3013L
ME-SFI TWC heating-up function		GF07.61-P-3032F
Engine oil information function	Engine 104, 111, 119, 120 with oil level check switch	GF07.61-P-3026G
	Engine 111, 112, 113, 137 with oil sensor	GF07.61-P-3026A
Catalytic converter efficiency monitoring function	EURO3/4 (Code 925/926 or standard) and	GF49.10-P-3033F
Catalytic converter temperature warning system function	Engine 104.941/991/994 up to 7/96 Engine 111.945/970/974 up to Model year 98 Engine 119.98, 120 up to 5/96	GF49.10-P-3034F

In the event of a fault which could damage the catalytic converter, the engine diagnosis indicator lamp flashes.

The indicator lamp goes out after 3 correct, successive driving cycles.

Fault storage

Recognized faults are stored when they arise for the first time with their environmental data in the fault memory. If the fault is not confirmed during the following driving cycle, it is deleted. Emission-relevant faults are always entered, they have a high priority.

After 40 correct driving cycles an exhaust gas relevant fault and after 80 correct driving cycles a TWC damaging fault is erased from the fault memory.

Read out the fault memory

The ME-SFI [ME] control unit is connected via a serial interface (K-line) to the data link connector. The stored faults can be read out and deleted with STAR DIAGNOSIS or with a standard output device (generic scan tool) with "Ignition ON" or with the engine running via the data link connector (SAE standard ISO 9141-2).

The fault memory is not erased if the vehicle battery is disconnected.

Emergency running

If a fault is detected, substitute values are formed for the emergency running and the engine diagnosis/CHECK ENGINE indicator lamp lights up.

ME-SFI control unit after-running

After faults are erased it is necessary to wait until the processor has completed its power-down sequence after the ignition is switched off. The duration is dependent on the coolant temperature and is between 5 and 150 seconds.

Component description for the ME-SFI [ME] control unit		GF07.61-P-6000V
Component description for the "CHECK ENGINE" indicator lamp	At	GF54.30-P-5011V
Component description for an engine diagnosis indicator lamp	except	GF54.30-P-5010V