Connect Procedures
WARNING: This page is about a different car, the 2004 Mercedes-Benz C230 and 2003 Mercedes-Benz C230. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Install new back up battery for TELE AID. Switch OFF service mode in emergency call system by turning ignition on. Confirm "Leave Service Mode" with okay on handset and then confirm "No Telematic Service" with okay. If removed, tighten luggage compartment cargo anchoring lugs to specification. See TORQUE SPECIFICATIONS .
- If a quiescent current retention unit was not used, perform basic programming, read diagnostic trouble code memory and erase trouble codes from memory. See BASIC PROGRAMMING and RETRIEVING & ERASING DIAGNOSTIC TROUBLE CODES .