Blower regulator function - GF83.10-P-2103-01P

Operation for automatic heater (HEAT) and automatic air conditioning (AAC) 

In automatic heating mode (HEAT) and automatic air conditioning (AAC) the blower controller, in manual operation, is actuated in 6 stages via the blower switch integrated in the control and actuating unit for automatic heating and automatic air conditioning systems as well as via the air conditioning Bus.

In addition, the automatic operating mode of the automatic air conditioning (AAC) can be selected via the AUTO button ( ).

Depending on the actually measured interior space temperature and the set specified temperature, the blower controller then controls the operating voltage for the blower (0 - 100%). This results in control of the blower speed between 0 - 100%.

Function for Automatic comfort air conditioning (C-AAC) 

By operating the blower button ( ), a control voltage (0 - 100%) is transmitted to the blower controller via the control and actuating unit of the automatic air conditioning system and the air conditioning Bus. Depending on the existing control voltage, the blower controller then controls the operating voltage for the blower between 0 - 100%. This results in control of the blower speed between 0 - 100%.

In addition, the automatic operating mode can be selected via the AUTO button

( ).

Depending on the actually measured interior space temperature and the set specified temperature, the blower controller then controls the operating voltage for the blower (0 - 100%). This results in control of the blower speed between 0 - 100%.

The blower controller can be diagnosed in all three systems. The following values can be called up:

• Current
• Temperature
• Voltage
• Fault memory