Keyless go, function - GF80.61-P-0005T
MODEL 211.0/2 with CODE (889) Keyless go
General
The keyless go function allows the vehicle to be entered and started without using the remote control key (A8/1). For access and drive authorization it is sufficient to carry the remote control key (A8/1) with you.
The function of the standard central locking is maintained parallel to the keyless go functions.
The convenience opening function is not possible via keyless go.
Unlocking with keyless go
The vehicle can be unlocked by:
- Pulling any door handle (global or selective opening).
- Pulling trunk lid or rear-end door handle (only trunk lid or rear-end door is opened).
Locking with keyless go
The vehicle can be locked by:
- Actuate outer door handle switch at one of the door handles
- Actuate trunk lid keyless go button (S62/21) on trunk lid or rear-end door.
On vehicles with code (551a) anti-theft alarm (ATA) the anti-theft alarm reacts in the same manner as when locked and unlocked with the remote control key (A8/1).
Starting engine and switching off with keyless go
The engine can be started or shut off by pressing the keyless go
start/stop button (S2/3) on the selector lever.
| Keyless go, location of components | Model 211.0 | GF80.61-P-0005-01T |
| Model 211.2 | GF80.61-P-0005-01TA | |
| Keyless go, block diagram | GF80.61-P-0005-02T | |
| Unlocking, function | Model 211.0 | GF80.61-P-2009T |
| Model 211.2 | GF80.61-P-2009TA | |
| Locking, function | GF80.61-P-2010T | |
| Engine start/stop, function | GF80.61-P-3012T | |
| Communication of remote control key with vehicle, function | GF80.61-P-3013T |