Switch off interior motion sensor, function - GF80.50-P-3025T

MODEL 211.0/2 with code (551a) Anti-theft alarm system (ATA) with code (882b) Interior motion sensor (only with anti-theft alarm system) 

Function prerequisites 

The interior motion sensor (model 211.0) or the interior protection and glass breakage protection (model 211.2) can only be switched off

• before activating the anti-theft alarm (ATA) and when
• circuit 15c or circuit 15R ON

The interior motion sensor is only switched off for one actuation of the (ATA) and must be repeated if desired.

Function 

To switch off the interior motion sensor (model 211.0) or the interior protection and glass breakage protection (model 211.2) actuate IRS switch (S93/3s3)

The acknowledgment signal commences 0.5 s after the switch is released and lasts for 2 s.

Deactivation of the interior motion sensor is indicated by the IRS switch (S93/3s3) for 2 s by flashing.

When the anti-theft alarm (ATA) is then activated the interior motion sensor (model 211.0) or the interior protection and glass breakage system (model 211.2) remain deactivated.

Upper control panel control module, location/purpose/design/function	Model 211.0	GF54.21-P-4105T
	Model 211.2	GF54.21-P-4105TS
Overhead control panel control module, location/purpose/design		GF82.20-P-4110T
Glass breakage sensor location/purpose/design/function	Only on model 211.2 with code (882b) infrared interior monitoring (only with ATA)	GF80.50-P-4107TA
Interior protection sensor, location/purpose/function	Model 211.0 with code (882b) infrared interior monitoring (only with ATA) and with code (413) panorama sliding roof	GF80.50-P-4113T
	Model 211.0 with code (882b) infrared interior monitoring (only with ATA) and without code (413) panorama sliding roof Model 211.2 with code (882b) infrared interior monitoring (only with ATA)	GF80.50-P-4113TA