FixVault
Home › Mercedes Benz › 2013 › G63 › Repair and Diagnosis › General Information › Reset Procedures › Tire Pressure Monitor Systems › TPMS Reset Procedures › Tire Pressure Monitor System Reactivation

Tire Pressure Monitor System Reactivation

CAUTION: The warning system can only operate in a reliable manner if correct tire pressures are set. If an incorrect tire inflation pressure is set, the system will monitor the pressure according to the incorrect value.
NOTE: TPMS activation is accomplished by using the multifunction display control buttons on left side of steering wheel.
  1. Ensure inflation pressure of all 4 tires is set to specification.
  2. Make sure that the SmartKey is in position 2.
  3. Press the LEFT or RIGHT arrow button to select the SERV. menu. Press OK button.
  4. Press the UP or DOWN arrow button to select TIRE PRESSURE. Press OK button.
  5. The multifunction display shows the current tire pressure of the individual tires, or if the vehicle has been parked for over 20 minutes, the message TIRE PRESSURE WILL BE DISPLAYED AFTER DRIVING A FEW MINUTES.
  6. Press the DOWN arrow button. The message USE CURRENT PRESSURES AS NEW REFERENCE VALUES will appear.
  7. Press the OK button. The message TIRE PRESS. MONITOR RESTARTED will appear.
  8. After about 10 minutes driving time the current tire pressures are displayed. The activation process is complete.
About FixVault