ME-SFI idle, function - GF07.61-P-2006MOS
ENGINE 275.953 in MODEL 216.376, 221.176 as of Model Year 2009 /AEJ 08
ENGINE 275.982 in MODEL 216.379, 221.179 as of Model Year 2009 /AEJ 08
Function requirements for neutral general points
- Circuit 87M ON (engine control ON)
- Engine running (engine speed >700 rpm)
- Accelerator not operated
Neutral, general points
The following partial functions are active in neutral and are described in the following documents:
- ME fuel supply, function
- ME-SFI injection regulation function
- Motor electronics (ME-SFI) ignition system function
- ECI ignition system function
- ME-SFI Start, post-start phase and warm-up enrichment function
- ME-SFI idle speed control function
- ME-SFI alternator interface function
- ME-SFI engine speed signal function
- ME-SFI safety fuel shutoff function
- ME-SFI lambda control function
- ME-SFI two-sensor control function
- ME-SFI oxygen sensor heater function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis function
- ME-SFI thermal management function
- ME-SFI engine torque requests function
- ME-SFI knock control function
- Overheating/knock protection function
- Air injection function
- ME-SFI electronic accelerator function
- Electronic accelerator pedal emergency running mode, function
- Purge function
- System purging with leak test function (with code (494) USA version)
- Monitoring catalytic converter efficiency, function
| ME-SFI fuel supply function | GF07.61-P-3004MOS | |
| ME-SFI injection regulation function | GF07.61-P-3002MOS | |
| Motor electronics (ME-SFI) ignition system function | GF07.61-P-3008MOS | |
| ECI ignition system function | GF15.15-P-3000MOS | |
| ME-SFI Start, post-start phase and warm-up enrichment function | GF07.61-P-3014MOS | |
| ME-SFI idle speed control function | GF07.61-P-2008MOS | |
| ME-SFI alternator interface function | GF07.61-P-3003MOS | |
| ME-SFI engine speed signal function | GF07.61-P-3017MOS | |
| ME-SFI safety fuel shutoff function | GF07.61-P-3018MOS | |
| ME-SFI lambda control function | GF07.61-P-4022MOS | |
| ME-SFI two-sensor control function | GF07.61-P-3020MOS | |
| ME-SFI oxygen sensor heater function | GF07.61-P-3024MOS | |
| Self-adjustment of mixture formation function | GF07.10-P-1029MOS | |
| Smooth engine running analysis function | GF07.10-P-1030MOS | |
| ME-SFI thermal management function | GF07.61-P-4012MOS | |
| ME-SFI engine torque requests function | GF07.61-P-4013MOS | |
| ME-SFI knock control function | GF07.61-P-4031MOS | |
| Overheating/knock protection function | GF07.61-P-4027MOS | |
| Air injection function | GF14.30-P-3012MOS | |
| ME-SFI electronic accelerator function | GF30.20-P-3012MOS | |
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026MOS | |
| Purge function | GF47.30-P-3015MOS | |
| Purge system with leak test function | With code (494) USA version | GF47.30-P-3016MOS |
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033MOS |