Power Window Assembly, Basic Function - GF67.39-P-9900A
Model All (4xWD)
Model All (CAR)
Overview
This document contains information on:
- General
- Function requirements
- Function
- Actuation
- Prioritization
- Excess force limiter
General
The window lifter is a mechanical lifting device that is driven by an electric motor.
It can be used to open and close the respective side window.
Function requirements
- Terminal 15R ON or control unit power-down active (manual operation)
Control unit power-down:
After terminal 15R is OFF, the window lifters can still be operated with the corresponding power window switch for another 5 min.
The respective window lifter must be normalized for all automatic functions.
The normalization ensures that the system can accurately determine the position of the window lifter.
The position of the window lifter cannot be determined in the denormalized condition. The function is then limited to manual opening and closing.
Function
Actuation
The actuation of the window lifter can be triggered via various different control elements or functions, see table below.
| Control element/function | Action | Additional information |
|---|---|---|
| Power window switch (actuated up to pressure point and held) | Actuation for the duration of operation (max. 25 s) | - |
| Power window switch (actuated beyond the pressure point and released) | Actuation until the respective end position is reached | - |
| Web-based via browser (e.g. tablet/PC/smartphone) (Vehicles with Remote Online) |
Actuation as per the application | The status of the side windows can be accessed at any time. |
| On the vehicle side, this telematics service is implemented using a mobile radio connection to the Service Center. | ||
| Convenience feature | Actuation of all window lifters, together with the sliding sunroof or panoramic sliding sunroof if necessary, from one control point | - |
| Rain closing function | Side windows are closed to prevent the ingress of rain. | - |
| PRE-SAFE® (Vehicles with PRE-SAFE® system) |
Closing of the side windows in potentially hazardous situations to protect the vehicle occupants | - |
| Crash ventilation | Opening of the side windows after an accident in which the airbag was deployed | - |
If the power window switch is actuated for more than 25 s, the actuation is aborted. The continuous request is assessed as a fault of the power window switch.
A new actuation (triggered with the power window switch) can be performed only after it has been detected that the power window switch is in the rest position.
The driver can use the child safety lock to deactivate operation with the power window switch in the rear passenger compartment.
Prioritization
The individual requests that result in the actuation of the window lifter are prioritized according to their importance. The manual request with the power window switches in the driver's door have the highest priority.
Driver's door power window switch
Power window switches of the other doors
Diagnostic system
PRE-SAFE® (vehicles with PRE-SAFE® system)
Crash ventilation
Convenience feature
Web-based operation (vehicles with Remote Online)
Rain closing function
Active actuation can be canceled by a higher priority request at any time. The higher priority request is then executed immediately. Lower priority requests are ignored during this actuation.
Excess force limiter
Safe operation of the window lifters is ensured by the excess force limiter, blockage detection, and overheating protection.
The excess force limiter is available only for normalized window lifters.
In the case of manual and automatic closing, the excess force limiter operates in a range of approx. 3 to 230 mm with different levels of sensitivity (escalation stages). It provides protection against severe injuries. The power window motor current serves as a reference for the excessive force.
The individual escalation stages depend on the type of request and its background, see table below.
| Manual closing | 1st actuation (escalation level 1) | 2nd actuation (escalation level 2) | 3rd actuation (escalation level 3) |
|---|---|---|---|
| Power window switches held | Stop at 100 to 115 N | Stop at 130 to 145 N | Actuation remains active. |
| Power window switches released | Reverse by 20 to 25 mm | Reverse by 20 to 25 mm | Actuation is stopped. |
| Automatic closing | 1st actuation (escalation level 1) | 2nd actuation (escalation level 2) | 3rd actuation (escalation level 3) |
|---|---|---|---|
| Power window switches released | Stop at 50 to 60 N Reverse by 125 to 130 mm |
Stop at 70 to 80 N Reverse by 125 to 130 mm |
Only manual closing is possible at this point. |
| Automatic closing trigger | 1st actuation (escalation level 1) | 2nd actuation (escalation level 2) |
|---|---|---|
| Convenience closing | Stop at 50 to 60 N Reverse by 125 to 130 mm |
Stop at 70 to 80 N Reverse by 125 to 130 mm The function is blocked until the next ignition cycle. |
| Web-based operation (Vehicles with Remote Online) | Stop at 50 to 60 N Reverse by 125 to 130 mm |
Stop at 70 to 80 N Reverse by 125 to 130 mm The function is blocked until the next ignition cycle. |
| PRE-SAFE® (Vehicles with PRE-SAFE® system) | Stop at 70 to 80 N Reverse by 125 to 130 mm The function is blocked until the next ignition cycle. |
- |
| Rain closing function | Stop at 70 to 80 N Reverse to the default position The function is blocked until the next ignition cycle. |
- |
The transition from one escalation stage to the next occurs when the same request is made again within 2 s after the end of the reversing procedure.
The system is designed adaptively to prevent wear or outside influences such as moisture and icing from being evaluated as pinching.
The system recognizes sluggishness by the increased power consumption of the respective power window motor, and calculates an additional force of 10 N for the next request.
This ensures that the speed remains constant while the side window is being opened and closed. The adaptation is limited to a maximum value of 80 N.
Rough road detection:
The rough road detection function is active as of a speed of 8 km/h. It prevents vibrations caused by poor road surface conditions from being defined as pinching.
| Function schematics | |||
| Function schematic for actuation of rear power window assembly | Model 465 | PE67.39-P-2500-97D | |
| Model 118, 177, 243, 247 | PE67.39-P-2500-97A | ||
| Model 167, 293 Model 213, 238, 257, 290 as of model year 2021 | PE67.39-P-2500-97B | ||
| Model 206, 214, 223, 236, 254, 294, 295, 296, 297 | PE67.39-P-2500-97C | ||
| Function schematic for actuation of driver's side power window assembly | Model 465 | PE67.39-P-2501-97C | |
| Model 118, 167, 177, 243, 247, 293 Model 213, 238, 257, 290 as of model year 2021 | PE67.39-P-2501-97A | ||
| Model 192, 206, 214, 223, 232, 236, 254, 294, 295, 296, 297 | PE67.39-P-2501-97B | ||
| Function schematic for actuation of front passenger side power window assembly | Model 465 | PE67.39-P-2502-97C | |
| Model 118, 167, 177, 243, 247, 293 Model 213, 238, 257, 290 as of model year 2021 | PE67.39-P-2502-97A | ||
| Model 192, 206, 214, 223, 232, 236, 254, 294, 295, 296, 297 | PE67.39-P-2502-97B | ||
| Further basic functions | |||
| Power window motor, basic function | GF67.39-P-2004A | ||
| Electric child safety lock, basic function | GF72.29-P-1001A | ||
| Power window assembly and outside mirror adjustment switch group, driver's side, basic function | GF72.29-P-2006A | ||
| Front door control unit, basic function | GF72.29-P-9891A | ||
| Rear door control unit, basic function | GF72.29-P-9892A | ||
| Rain closing function, basic function | Model all (4xWD) except code 494 (US version) Model all (CAR) except code 494 (US version) |
GF77.20-P-1002A | |
| Normalize electrically driven component parts, basic function | Model all (CAR) | GF82.00-P-1000A | |
| Blockage detection, basic function | Model all (CAR) | GF82.00-P-1001A | |
| Automatic reversing, basic function | Model all (CAR) | GF82.00-P-1002A |