Update Stereo MULTIFUNCTION Camera Control Unit Software (P-SC-2019110019)
Publication date: 2019-12-01Reference number: P-SC-2019110019
UPDATE STEREO MULTIFUNCTION CAMERA CONTROL UNIT SOFTWARE
SERVICE CAMPAIGN BULLETIN
Reference Number(s): P-SC-2019110019, Date of Issue:
December 01, 2019
| MERCEDES-BENZ: | Models 217; 222 |
SERVICE INFORMATION
- Ensure use of XENTRY Diagnosis version BD/DVD (07/2019) or higher.
- Before starting the work procedure, install all the add-ons that are updated daily in XENTRY Diagnosis.
- Please make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
- Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical system battery (greater than 12.5 V).
- If XENTRY Diagnosis is already connected to the vehicle, start with operation step 2.
If two or more software updates or SCN codings are performed during one workshop visit the operation items 02-4762 and 02-5058 may be invoiced only once for each workshop order!
WORK PROCEDURE
- Connect XENTRY Diagnosis.
- Update control unit software or A40/13 (stereo multifunction camera).
To do so, select menu item "Quick test view - A40/13 (stereo multifunction camera) - Adaptations - Control unit update - Update of control unit software".
Then follow the user guidance in XENTRY Diagnosis.
- Disconnect XENTRY Diagnosis.
OPERATION TEXT AND FLAT RATE
OPERATION TEXT AND FLAT RATE
| Operation no. | Operation text | Flat rate | Accounting no./damage code | ||
|---|---|---|---|---|---|
| 02-9334 | Update stereo multifunction camera control unit software (XENTRY Diagnosis connected) | 0.1 h | 54 990 01 | ||
| 02-4762(1) | Connect/disconnect vehicle diagnosis system (XENTRY Diagnosis) | 0.1 h | 54 990 01 | ||
| 02-5058(1) | Connect/disconnect starter battery charger (with XENTRY Diagnosis connected) | 0.1 h | 54 990 01 | ||
|
|||||
Mercedes-Benz
Global Service & Parts