FixVault
Home › Mercedes Benz › 2018 › Sprinter 2500 Van Cargo Extended, RWD › Repair and Diagnosis › External Pages › Different car › Section 3084 (Electronic Control Modules (Service Information)) › Module, Powertrain Control (Pcm) › Removal And Installation › 2.0L Diesel › Removal

2.0L Diesel: Removal

WARNING: This page is about a different car, the 2018 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
  1. In the event of Powertrain Control Module (PCM) replacement: connect the diagnosis equipment to the vehicle diagnosis socket, go to "PCM" in the "Miscellaneous functions" menu and start the "Control unit replacement" procedure; with the key at OFF and the hazard warning light button activated, go to Body Control Module "(BCM)" in the "Miscellaneous functions" menu and start the "Secret key transfer" procedure.
  2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATIONCOVER, ENGINE, REMOVAL AND INSTALLATION .
    GC0172970Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the PCM wire harness connectors (1).
  4. Remove the nuts (2a) and the PCM (2b).
About FixVault