Update MERCEDES-BENZ Intelligent Drive Control Unit Software (P-SC-2019030021)

UPDATE MERCEDES-BENZ INTELLIGENT DRIVE CONTROL UNIT SOFTWARE

SERVICE CAMPAIGN BULLETIN

SERVICE INFORMATION

• Ensure use of XENTRY Diagnosis version  BD/DVD (12/2018)  or higher.
• Before starting the work procedure, install all the add-ons that are updated daily  in XENTRY Diagnosis. 
• Please make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
• Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical system battery  (greater than 12.5 V).
• If XENTRY Diagnosis is already connected to the vehicle, start with operation step 2. 

If two or more software updates or SCN codings are performed during one workshop visit, the operation items 02-4762 and 02-5058 may only be invoiced once for each workshop order  !

WORK PROCEDURE

1. Connect XENTRY Diagnosis.
2. Update Mercedes-Benz Intelligent Drive  control unit software.

   To do this, select menu item "Quick test view -N62/4 - Mercedes-Benz Intelligent Drive (ECU/DAS)  - Adaptations - Control unit update - Update of control unit software".

   Then follow the user guidance in XENTRY Diagnosis.

3. Disconnect XENTRY Diagnosis.

OPERATION TEXT AND FLAT RATE

Operation no.	Operation text	Flat rate	Accounting no./damage code
02-9334(1)	Update Mercedes-Benz Intelligent Drive  control unit software (with XENTRY Diagnosis connected) Acc. no.: 54 903 09  ; code: 19P5490309	0.1 h	54 903 09
02-4762(2)	Connect/disconnect vehicle diagnosis system (XENTRY Diagnosis)	0.1 h	54 903 09
02-5058(2)	Connect/disconnect starter battery charger (with XENTRY Diagnosis connected)	0.1 h	54 903 09
(1) Please manually enter the affected control unit with code and accounting number in the workshop order as per the work instructions (2) Operation item may only be invoiced once for each workshop order!

Mercedes-Benz

Global Service & Parts