Tools - 177 Chassis
- Safety Precautions
- Shop-Made Tools
- (Wooden Block For Supporting Engine - WF58.50-L-2610-01VA)
- Copper Plate For Welding In Metal Parts - WF58.50-N-6310-01A
- Guard Plate For Radiator/Condenser - WF58.50-P-0110-01A
- (Probe Plunger And Sleeve For Cylinder Head Bolt Hole Threads - WF58.50-P-0130-01A)
- (Round Bar For Knocking Steel Ball Out Of Main Oil Gallery - WF58.50-P-0140-01A)
- (Extension For Counterholder - WF58.50-P-0330-02A)
- (Test Wiring Harness For Testing Fuel Injection Valves - WF58.50-P-0761-01A)
- (Modifying Support Plate For Transfer Case - WF58.50-P-1000-02P)
- (Pin For Locking Poly-V Belt Tensioning Device - WF58.50-P-1325-02A)
- (Modifying Long Wedge For Adjusting Seal On Sliding/Pop-Up Roof Cover - WF58.50-P-1360-01K)
- (Double Hexagon Wrench To Remove Pulley - WF58.50-P-1540-01I)
- Connection Fitting For Automatic Transmission Fluid Pipes - WF58.50-P-2020-01A
- (Impact Drift For Cup Of Inductive Sensor - WF58.50-P-2630-01A)
- (Assembly Plate For Freewheel Inner Race - WF58.50-P-2750-02A)
- Shell Halves (2 ea.) For Pressing Off And Caulking The Inner Constant Velocity Joint - WF58.50-P-3530-01A
- Staking Tool For Securing Joint Hub On Rear Halfshaft - WF58.50-P-3530-07P
- (Assembly Sleeve For Tapered Roller Bearing Inner Race Of Drive Pinion - WF58.50-P-3531-03A)
- (Press On Sleeve For Tapered Roller Bearing Cone On Drive Pinion - WF58.50-P-3531-03B)
- Support For Retaining Device - WF58.50-P-4020-01A
- Drift For Releasing The Fitting Sleeves In The Flexible Couplings - WF58.50-P-4110-01A
- (Hook For Aligning Inner Panel - WF58.50-P-4340-01P)
- (Steering Wheel Hub For Clamping Upper Steering Shaft - WF58.50-P-4610-02I)
- (Fabricate Drilling Template For Tail Lamp Mounts - WF58.50-P-6420-03A)
- (Cover Panel For Protecting Roof Paneling - WF58.50-P-6805-05N)
- Puller Hook For Lower Part Of Clip On Sliding/Pop-Up Roof Trim - WF58.50-P-7720-03A
- (Rod For Opening The Reed Valve In The Air/Water Duct - WF58.50-P-8310-01A)
- Screwdriver Bit For Actuator Motor - WF58.50-P-8320-01A
- (Torx Double End Box Wrench For Removal Of Refrigerant Compressor - WF58.50-P-8355-01A)
- (Assembly Hook For Tacking Tool - WF58.50-P-9118-01A)
- Shop-Made Tools: Passenger Cars - WF58.50-Z-0998AZ
- Forms