Mount/Remove Support Fixture For Engine/Transmission Unit For Repair Operations - AR01.10-P-0107MFA
Engine 139, 260, 282, 608, 654 in model 118, 177, 247
| Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | AS00.00-Z-0035-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | AH00.00-Z-0300-01A | |
| Remove/install | |||
| 1 | Remove voltage of high-voltage on-board electrical system. | Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | AR47.70-P-1000MFH |
| 2 | Remove bottom engine compartment lining. | Engine 139 in model 118, 177, 247.7 Engine 260 in model 118, 177, 247 with code M016 (Uprated engine) | AR61.20-P-1105MFR |
| Engine 608, 654 in model 118, 177, 247 | AR61.20-P-1105MFE | ||
| Engine 260 in model 118, 177, 247 except code M016 (Uprated engine) Engine 282 in model 118, 177, 247 | AR61.20-P-1105MFA | ||
| 3 | Remove screws and place high-voltage wiring harness to one side. | Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) |
*BA47.70-P-1013-03C |
| *BA47.70-P-1012-03C | |||
| 4 | Remove right and left front fender liner. | AR88.10-P-1301MFA | |
| 5 | Remove oil pan soundproofing. | Engine 608 in model 118, 177, 247 | AR94.30-P-1000MFE |
| 6 | Remove electrical wiring harness from the oil pan. | Engine 282 in model 118, 177, 247 | |
| 7 | Attach support fixture in the event of repair work in the vehicle. | AR01.10-P-0105-02MFA | |
| Fig 1 | |||
| Fig 2 | |||
| 8 | Install in the reverse order. |
HIGH-VOLTAGE POWER DISTRIBUTOR
| Number | Designation | Model 118 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | Model 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | |
|---|---|---|---|---|
| BA47.70-P-1012-03C | Screw, cable duct to oil pan | Nm | 8 | 8 |
HIGH-VOLTAGE POWER DISTRIBUTOR
| Number | Designation | Model 177 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | |
|---|---|---|---|
| BA47.70-P-1012-03C | Screw, cable duct to oil pan | Nm | 8 |
HIGH-VOLTAGE POWER DISTRIBUTOR
| Number | Designation | Model 118 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | Model 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | |
|---|---|---|---|---|
| BA47.70-P-1013-03C | Screw, cable duct to engine support | Nm | 8 | 8 |
HIGH-VOLTAGE POWER DISTRIBUTOR
| Number | Designation | Model 177 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) | |
|---|---|---|---|
| BA47.70-P-1013-03C | Screw, cable duct to engine support | Nm | 8 |