Perform SCN Coding In The Active Suspension And Damping System Control Unit (P-SC-2022020010)
Publication date: 2022-02-01Reference number: P-SC-2022020010
PERFORM SCN CODING IN THE ACTIVE SUSPENSION AND DAMPING SYSTEM CONTROL UNIT
SERVICE CAMPAIGN BULLETIN
Reference Number(s): P-SC-2022020010, Date of Issue:
February 01, 2022
| MERCEDES-BENZ: | Model 167 |
SERVICE INFORMATION
- Ensure use of XENTRY Diagnosis version 09/2021 or higher.
- Before starting the work procedure, install the current version of all add-ons in XENTRY Diagnosis.
- Make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
- Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical system battery (greater than 12.5 V).
- If XENTRY Diagnosis is already connected to the vehicle, start with operation step 2 .
If two or more software updates or SCN codings are performed during one workshop visit, the operation items 02-4762 and 02-5058 may only be invoiced
once for each workshop order.
WORK PROCEDURE
- Connect XENTRY Diagnosis.
- Perform SCN coding in the active suspension and damping system
control unit.
To do this, select menu item "Ouick test view - N51/8 Active suspension and damping system (Active suspension) - Adaptations - Control unit update - Updating of SCN coding".
Then follow the user guidance in XENTRY Diagnosis.
- Disconnect XENTRY Diagnosis.
OPERATION TEXT AND FLAT RATE
OPERATION TEXT AND FLAT RATE
| Operation no. | Operation text | Flat rate | Accounting no./damage code | ||
|---|---|---|---|---|---|
| 02-9446 | Perform SCN coding in the active suspension and damping system control unit (with XENTRY Diagnosis connected) | 0.1 h | 54 922 12 | ||
| 02-4762(1) | Connect/disconnect diagnostic system (XENTRY Diagnosis) | 0.1 h | 54 922 12 | ||
| 02-5058(1) | Connect/disconnect starter battery charger (with XENTRY Diagnosis connected) | 0.1 h | 54 922 12 | ||
|
|||||
Mercedes-Benz
Global Service & Parts