Technical Bulletins: Campaigns: Other Variant

WARNING: This page is about the GLB250 4Matic, which is a different variant/trim than selected.

Accessories & Equipment
- Update Digital Operator's Manual And Enclose Printed Operator's Manual, Replace If Necessary (P-SC-2024070020)
Axle Shafts
- Check Front Axle Stabilizer; Replace If Necessary (P-SC-2022100012)
Body Interior
- Update Powertrain And Instrument Cluster Control Unit Software (P-SC-2022110009)
Exterior Lights
- Check Gap Dimension Of Fender To Left And Right Tail Lamp, Rework If Necessary (P-SC-2023040014)
Frames, Subframes & Crossmembers
- Recall Campaign Initial Notification - Replace B-Pillar Certification Label - My22-25 GLE, GLS, EQB, GLA, GLB, EQE SUV, EQS SUV, And GLC (167, 243, 247, 294, 296, And 254) (P-RC-2024050010)
Gauges & Instrument Panels
- Update Powertrain And Instrument Cluster Control Unit Software (P-SC-2022110009)
Identification
- Service Campaign 2024060019 - Replace Certification Label On B-Pillar-Second Reprint (P-SC-2024060019)
Ignition Switch/Steering Lock
- Perform SCN Coding In N73 Electronic Ignition Lock Control Unit (P-SC-2022110004)
Interior/Exterior Trim
- Recall Campaign Initial Notification - Replace B-Pillar Certification Label - My22-25 GLE, GLS, EQB, GLA, GLB, EQE SUV, EQS SUV, And GLC (167, 243, 247, 294, 296, And 254) (P-RC-2024050010)
None
- Check Air Bellows Of Upper Front Axle Transverse Control Arm On Both Sides, Replace Transverse Control Arm If Necessary (P-SC-2022100010)