FixVault
Home › Mercury › 1983 › Capri Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul - C-3 › Torque Converter › Stator Interference Check › Stator-to-Impeller Interference Check

Stator-to-Impeller Interference Check

  1. Position front pump assembly on bench with spline end of stator shaft pointing up. Mount converter on pump so splines of one-way clutch inner race engage splines of stator support and converter hub engages pump drive gear.
  2. While holding pump stationary, rotate converter counterclockwise. Converter should rotate freely without interference or scraping within assembly. Should this condition exist, replace converter unit.
About FixVault