Front Wiper/Washer Switch Test: Capri
Remove lower steering column cover to gain access to wiper switch electrical connector. Using an ohmmeter, ensure continuity exists between terminals listed in table at specified switch positions. If switch does not test as specified, replace wiper/washer switch. See FRONT WIPER/WASHER SWITCH CONTINUITY (CAPRI) table. See Fig 1 .
FRONT WIPER/WASHER SWITCH CONTINUITY (CAPRI)
| Terminal | Position | Continuity | ||
|---|---|---|---|---|
| BLU - BLU/ORG | Pull washer lever | Yes | ||
| " | Release washer lever | No | ||
| BLU - BRN/WHT | Int | Yes | ||
| " | All other positions | No | ||
| BLU - GRN | Lo | Yes | ||
| " | High | Yes | ||
| " | All other positions | No | ||
| BLU - BLU/RED | High | Yes | ||
| " | All other positions | No | ||
| ORG - YEL/RED | Rotate INT control knob | (1) | ||
|
||||