Idle Speed
- Turn off all accessories. Place automatic transmission in Park or manual transmission in Neutral. Set parking brake. Connect tachometer to engine. Warm engine to normal operating temperature. Connect a jumper wire between single-wire STI test connector (Green on Capri; Black on Festiva) and ground. See Figure .
- Locate idle speed control by-pass air (ISC-BPA) valve on intake manifold. Remove cap, and adjust idle speed to specification by turning idle air adjust screw on ISC-BPA valve. See Fig 1 . Remove jumper wire.
IDLE RPM
| Application | Auto. Trans. | Man. Trans. |
|---|---|---|
| 1.3L | 830-870 | 680-720 |
| 1.6L | 800-900 | 800-900 |