Side Mirror Motor Test
Remove door trim panel. Disconnect mirror motor connector from mirror switch harness. Using 2 jumper wires, connect battery voltage and chassis ground to specified wire terminals. See the appropriate LEFT & RIGHT MIRROR MOTOR TEST table. Observe mirror for proper movement. If mirror motor fails any portion of test, replace mirror assembly.
LEFT & RIGHT MIRROR MOTOR TEST (1)
| Mirror Movement | Battery Voltage | Ground | ||
|---|---|---|---|---|
| Up | BRN | YEL | ||
| Down | YEL | BRN | ||
| Left | YEL | BLK | ||
| Right | BLK | YEL | ||
|
||||