FixVault
Home › Mercury › 1993 › Villager GS, Van Cargo › Repair and Diagnosis › External Pages › Different car › Section 318 (Controls) › Ambient Temperature Sensor › Installation

Ambient Temperature Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connector to the ambient temperature sensor.
  2. Install the sensor onto the front fascia through the access hole in the fascia.
  3. Install the front license plate bracket (Refer to LICENSE PLATE BRACKET ).
  4. Reconnect the battery negative cable.
About FixVault