FixVault
Home › Mercury › 1993 › Villager LS › Repair and Diagnosis › Body & Frame › Power Windows › Adjustments › Front Door Glass

Front Door Glass

  1. Remove the front door trim panel. See DOOR TRIM PANEL under REMOVAL & INSTALLATION.
  2. Remove the two door panel bracket bolts and door panel bracket. See Fig 1 .
  3. Remove the plastic weather shield from the door.
  4. Loosen the four door glass regulator track bolts. See Fig 2 .
  5. Adjust the position of the door glass regulator track. See Fig 3 .
  6. Tighten the four door glass regulator track bolts securely.
Fig 1: Removing Door Bracket Bolts
G00097651Courtesy of FORD MOTOR CO.
Fig 2: Locating Door Glass Regulator Track Bolts
G00097652Courtesy of FORD MOTOR CO.
Fig 3: Adjusting Door Glass Regulator Track Position
G00097653Courtesy of FORD MOTOR CO.
About FixVault