Programming Ignition Keys To The SKREEM

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: A maximum of 8 keys can be learned to each SKREEM AT ONE TIME. Once a key is learned to a SKREEM it (the key) cannot be transferred to another vehicle.

Turn the ignition on (transmission in Park/Neutral).
Use the OBDIII(R) and select THEFT ALARM, SKREEM, then MISCELLANEOUS.
Select PROGRAM IGNITION KEYS.
Enter secured access mode by entering the vehicle 4-digit PIN.

If the ignition key programming is unsuccessful, the DRBIII(R) will display one of the following messages:

Programming Not Attempted

The DRBIII(R) attempts to read the programmed key status and there are no keys programmed in the SKIM memory.

Programming Key Failed

(Possible Used Key From Wrong Vehicle) SKREEM is unable to program the key due to either faulty ignition key transponder or an ignition key that is programmed to another vehicle.

8 Keys Already Learned, Programming Not Done

SKIM transponder ID memory is full. Obtain ignition keys to be programmed from customer (8 keys maximum). Using the DRBIII(R), erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS. Program all ignition keys.

Learned Key In Ignition

Ignition key transponder ID is currently programmed in SKREEM memory.