FixVault
Home › Mercury › 1993 › Villager LS › Repair and Diagnosis › External Pages › Different car › Section 249 (Overhead Console) › Overhead Console › Removal › Overhead Console Removal

Overhead Console Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the overhead console retaining screws, located in the sunglass storage bin.
  3. Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit.
  4. Lower the overhead console far enough to access the wire harness connectors.
  5. Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors.
  6. Remove the overhead console from the vehicle.
About FixVault