FixVault
Home › Mercury › 1993 › Villager LS › Repair and Diagnosis › External Pages › Different car › Section 299 (Power Distribution) › Power Outlet › Installation

Power Outlet: Installation

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cigar lighter or power outlet mount into the instrument panel.
  2. Reconnect the instrument panel wire harness connector to the connector receptacle of the cigar lighter or the power outlet receptacle base.
  3. Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the mount.
  4. Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.
  5. Install the cigar lighter knob and element into the cigar lighter receptacle base.
  6. Reconnect the battery negative cable.
About FixVault