Module - Fuel Tank: Removal
WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Drain and remove fuel tank. Refer to TANK - FUEL .
- Note rotational position of module before attempting removal. An indexing arrow is located on top of module for this purpose.
- Position Special Tool 9340 (3) into notches on outside edge of lock ring (5).
- Install 1/2 inch drive breaker bar (1) to tool 9340 (3).
- Rotate breaker bar counterclockwise to remove lock ring.
- Remove lock ring. The module will spring up slightly when lock ring is removed.
- Remove module from fuel tank. Be careful not to bend float arm while removing.